Senior Civil Engineer Cv

Starting...

Senior Civil Engineer Cv Alexander White Senior Civil Engineer 07700 90XXXX alexander.white@example.com alexanderwhite Leeds, LS6 2AB STRENGTHS Practical design judgement Checked levels, ground information and site constraints together, helping teams settle on civil designs that could be built safely. Clear coordination During substation interface reviews, brought civil, electrical and construction comments into actionable design decisions. Careful checking Recorded calculation assumptions and drawing checks so reviewers could trace the basis of design and raise focused questions. Constructability focus Considered access, services and construction requirements early, reducing avoidable clashes before drawings were issued. Graduate mentoring Shared drawing checking and calculation review methods with two graduates, helping them build confidence in design submissions. SKILLS Civil and structural design HV, MV and LV infrastructure Substation layouts Foundation design Cable route design Drainage design Access road design Structural steelwork Geotechnical principles Structural calculations Constructability reviews Design problem-solving Multidisciplinary coordination Contractor submission review Construction support MY CAREER 13.2 Years Senior Civil Engineer at Northfield Infrastructure Ltd (4.1 Years) Civil Engineer at Wren Energy Design (3.3 Years) Civil Design Engineer at Marlowe Civil Partners (3.3 Years) Assistant Civil Engineer at Pennine Utilities Design (1.4 Years) Graduate Civil Engineer at Barton Engineering Consultants (1.1 Years) SUMMARY Civil Engineer with 13 years of experience delivering civil and structural design for utility, energy and power infrastructure schemes. Hold a BEng in Civil Engineering and apply geotechnical and structural principles to HV, MV and LV projects, including substations and grid connections. Develop layouts, foundations, cable routes, drainage, access roads and structural steelwork, producing CAD drawings, calculations and technical documentation for buildable designs. Use AutoCAD, Civil 3D, STAAD and SAP2000 to develop and check designs, and coordinate civil, electrical and construction disciplines from concept through commissioning. Review contractor and vendor submissions against CDM regulations and industry standards, resolve design queries , and coordinate with ICPs and DNOs to keep technical interfaces clear throughout delivery. EXPERIENCE Senior Civil Engineer Northfield Infrastructure Ltd Oct 2022 - Present Leeds, West Yorkshire Leads civil design packages for HV grid connection and substation schemes, turning site constraints and electrical requirements into coordinated layouts for foundations, cable routes, drainage and access roads. Developed Civil 3D models and AutoCAD drawing sets for HV, MV and LV works, resolving clashes with electrical engineers and construction teams before issue for construction. Checked foundation calculations, soil information and structural steel designs using geotechnical and structural principles, documenting assumptions and design checks for technical review. Reviewed contractor and vendor submissions against design intent, CDM regulations and relevant industry standards , recording clear actions to close technical queries. Supported construction and commissioning teams with site design queries, design changes and technical documentation , helping maintain a clear record from concept through delivery. Coordinated grid connection design interfaces with ICPs and DNOs, aligning civil deliverables with project managers and the wider multidisciplinary engineering team. Resolved a constrained substation access and drainage layout by checking levels and vehicle clearances in Civil 3D with construction and electrical colleagues, avoiding a late drawing revision. Civil Engineer Wren Energy Design Jun 2019 - Sep 2022 York, North Yorkshire Produced civil and structural packages for energy and utility infrastructure, including substation layouts , equipment foundations, drainage and cable corridors. Used AutoCAD and Civil 3D to develop drawing packages and earthworks information, checking levels, access requirements and interfaces with electrical layouts. Prepared structural calculations and steelwork details in STAAD and SAP2000 , with design reviews focused on sound assumptions, constructability and traceable technical documentation . Evaluated ground investigation findings and geotechnical parameters for foundation options, escalating uncertainties early to support coordinated design decisions. Responded to construction queries and reviewed supplier information, updating drawings and calculations where agreed changes affected the civil design. Civil Design Engineer Marlowe Civil Partners Feb 2016 - May 2019 Nottingham, Nottinghamshire Delivered civil design for utility and power infrastructure projects, developing access arrangements, surface water drainage, cable routes and equipment bases from survey and project requirements. Built coordinated AutoCAD and Civil 3D drawings, checking dimensions, levels and service interfaces before multidisciplinary design reviews. Completed foundation and retaining structure calculations using STAAD and SAP2000 where appropriate, applying structural and geotechnical principles to site-specific conditions. Compiled calculations, drawings and technical notes into controlled design submissions, addressing review comments with electrical engineers and project managers. Provided construction-stage design clarifications and assessed contractor proposals to confirm they remained consistent with the approved design and applicable standards. Assistant Civil Engineer Pennine Utilities Design Sep 2014 - Jan 2016 Derby, Derbyshire Prepared AutoCAD drawings for utility infrastructure upgrades, including duct routes, small equipment foundations, drainage details and site access works. Supported senior engineers with calculations and technical documentation , checking survey data and ground information before design reviews. Coordinated drawing updates with electrical designers and recorded interface comments, improving the clarity of issued information for construction teams. Attended site visits to confirm design assumptions and documented practical constraints for follow-up in the civil design package. Graduate Civil Engineer Barton Engineering Consultants Aug 2013 - Aug 2014 Sheffield, South Yorkshire Produced and checked basic civil drawings for energy and utilities projects under senior engineer supervision, developing sound CAD and documentation practices. Assisted with foundation and drainage calculations, applying structural and geotechnical fundamentals and presenting working notes for review. Helped assemble design submissions and respond to drawing comments, gaining early experience of multidisciplinary coordination and construction requirements. LEADERSHIP, AWARDS & RECOGNITION Recognised by the project delivery team in 2024 for clear technical coordination during a substation design and construction interface review. Mentored two graduate engineers in drawing checking, calculation records and practical design review techniques during 2023 to 2025. EDUCATION BEng Civil Engineering University of Nottingham 2013 Nottingham, UK CERTIFICATIONS CSCS Academically Qualified Person card 2014 CDM Regulations: Designer Duties and Risk Management, continuing professional development course 2018 AutoCAD Civil 3D Essentials, Autodesk authorised training 2017 TECHNICAL SKILLS CAD and Drafting: AutoCAD, Civil 3D, MicroStation Structural Analysis: STAAD, SAP2000, ETABS Geotechnical Software: PLAXIS, GeoStudio, gINT Survey and Terrain: Trimble Business Center, Leica Geo Office, Autodesk InfraWorks BIM and Modelling: Autodesk Revit, Navisworks, Tekla Structures GIS Platforms: ArcGIS, QGIS, MapInfo Pro Calculation and Spreadsheets: Microsoft Excel, Mathcad, MATLAB Drawing Formats: DWG, DXF, DGN Engineering Standards: Eurocodes, BS 7671, ISO 19650 Project Documentation: Microsoft Word, Microsoft Project, SharePoint SKILLS Civil and structural design HV, MV and LV infrastructure Substation layouts Foundation design Cable route design Drainage design Access road design Structural steelwork Geotechnical principles Structural calculations Constructability reviews Design problem-solving Multidisciplinary coordination Contractor submission review Construction support PROFESSIONAL AFFILIATIONS Member, Institution of Civil Engineers (ICE), supporting continuing professional development and engagement with the civil engineering community. Member, Engineering Council, participating in professional engineering standards and development activities.

File
- Open
- Save
- Save As
- Rename
- PDF Page Setup
- Reset Margins
- Page View
- Preview
- PDF Download
- Show Styles
UK

US English

British English

Spanish (LatAm)

French

German

Japanese

Italian

Portuguese (BR)

Chinese (Simplified)
Log In