Electronics Engineer, Power Communications Systems Resume Jonathan Juarez Electronics Engineer, Power Communications Systems (480) 555-3168 jonathan.juarez@example.com linkedin.com/example/jonathanjuarez Tempe, AZ 85281 STRENGTHS Failure Analysis Tracked recurring telemetry and radio faults through records and field evidence, giving teams clearer repair decisions. Field Partnership Field technicians often sought guidance during commissioning because technical direction stayed practical and grounded in site conditions. Systems Design Balanced network architecture, equipment limits, and reliability needs when shaping communications upgrades for remote facilities. Technical Writing Turned project findings into usable procedures and instructions, helping field teams work from one dependable reference. Safety Focus Site visits around energized equipment reinforced a careful habit, PPE first, then verification against approved requirements. SKILLS SCADA EMS RTUs Telemetering Fiber Optics VHF Radio UHF Radio Microwave Radio MPLS Networking SONET TDM IP Networking VOIP Failure Analysis Substation Safety LANGUAGES English Native 40 Spanish Proficient 30 MY CAREER 11.1 Years Senior Electronics Engineer at Sonoran Transmission Technologies (3.6 Years) Electronics Engineer at Copper State Grid Solutions (3.1 Years) Communications Systems Engineer at High Desert Utility Engineering (2.5 Years) Junior Electronics Engineer at Mesa Controls Integration (1.9 Years) SUMMARY Electronics engineer with 11 years supporting communications and automated control infrastructure across electric utility and industrial power environments. Experience covers SCADA, EMS, RTUs, telemetering, operations support systems , fiber optics , microwave radio , VHF, UHF, spread spectrum radio , MPLS, SONET, TDM, IP, and VOIP networks. Defines technical requirements, engineering approaches, constraints, and standards for transmission communications systems. Investigates equipment failures through diagnostics, event records, maintenance history, and field observations, then guides corrective action. Partners with field technicians, engineers, project teams, and maintenance groups during design, commissioning, troubleshooting, and site verification. Work includes energized substations and communications facilities, with consistent use of PPE and electrical safety controls. EXPERIENCE Senior Electronics Engineer Sonoran Transmission Technologies March 2023 - Present Tempe, AZ Lead engineering support for transmission communications and automated control infrastructure. Own requirements, upgrade designs, failure investigations, maintenance reviews, field guidance, and safety focused verification across distributed facilities. Defined SCADA , RTU, telemetering , voice, and operations support requirements for transmission upgrades. Designed fiber optic and microwave paths around equipment limits, network reliability, and remote site conditions. Investigated recurring radio and telemetry failures using diagnostics, event records, and field observations. Guided technicians on VHF , UHF , spread spectrum, microwave, MPLS, TDM, IP, and VOIP systems. Reviewed regional maintenance execution and revised engineering instructions for consistent reliability practices. Verified energized substation installations with PPE, safety controls, and approved engineering requirements . Electronics Engineer Copper State Grid Solutions January 2020 - February 2023 Phoenix, AZ Engineered communications improvements for SCADA, EMS, RTUs, telemetering, and remote transmission facilities. Connected design criteria, failure analysis , technical procedures, commissioning support, and migration planning. Connected SCADA and EMS functions with RTUs , telemetering equipment, and remote transmission facilities . Established fiber, microwave, and IP design criteria around legacy equipment and operational constraints. Analyzed communications alarms and intermittent telemetry using network data and maintenance history. Produced repair and replacement recommendations that gave field teams clear corrective options. Authored procedures and configuration guidance for implementation, testing, and troubleshooting activities. Supported TDM and SONET migrations toward MPLS and IP while preserving operational voice and data paths. Communications Systems Engineer High Desert Utility Engineering June 2017 - December 2019 Flagstaff, AZ Supported power communications serving substations and remote facilities. Combined equipment testing, network analysis, controlled documentation, maintenance review, and field safety practices across industrial operating environments. Configured VHF, UHF, spread spectrum, and microwave equipment under approved engineering standards . Tested IP, TDM , and SONET connectivity supporting operational data and voice traffic. Traced network interruptions across segments and isolated communication failure points for engineering review. Updated drawings, procedures, and maintenance references after field equipment changes. Converted recurring maintenance findings into targeted inspection and replacement recommendations. Collected engineering data at substations while following PPE and electrical safety precautions. Junior Electronics Engineer Mesa Controls Integration June 2015 - May 2017 Mesa, AZ Supported industrial communications and automated control interfaces under professional engineering supervision. Prepared calculations, testing records, technical documents, and field evidence for reliable equipment decisions. Prepared calculations and equipment comparisons for communications projects under engineering supervision. Tested fiber and Ethernet connections used by control equipment and documented signal findings. Investigated equipment problems using schematics, test results, and maintenance records. Maintained drawings, procedures, and equipment records after approved field changes. Supported industrial site work while following location specific safety requirements and documented procedures. PROJECTS Transmission Fiber and Microwave Resiliency 2024 Improved communications path planning for remote transmission facilities by balancing fiber optic routes, microwave capacity, equipment constraints, and service reliability. SCADA and EMS Network Migration 2022 Supported migration from legacy TDM and SONET services toward MPLS and IP connectivity while preserving required operational voice, telemetry, and control data. LEADERSHIP & AWARDS Recognized by engineering leadership for dependable support during transmission communications upgrades and field commissioning. Selected by peers as a trusted resource for diagnosing radio, telemetry, and network failures across distributed sites. Received team recognition for clear procedures that improved consistency in maintenance and troubleshooting work. EDUCATION Bachelor's Degree in Electrical Engineering Arizona State University GPA: 3.5 2015 Tempe, AZ Coursework: Power systems, communication systems, control systems, engineering design CERTIFICATIONS Engineer in Training, Arizona 2016 Fundamentals of Engineering Examination 2016 TECHNICAL SKILLS Power Communications: SCADA, EMS, RTUs Telemetering Systems: Telemetering, Remote telemetry units, Data distribution Fiber Optics: Fiber optic links, Optical testing, Fiber path design Radio Communications: VHF radio, UHF radio, Spread spectrum radio Microwave Systems: Microwave radio, Point to point links, Radio path planning Data Networking: MPLS, IP networking, VOIP Legacy Networking: SONET, TDM, Circuit migration Engineering Analysis: Failure analysis, Equipment diagnostics, Corrective action Control Systems: Automated control, Real time control, Operations support systems Engineering Documentation: Technical requirements, Engineering procedures, Configuration guidance Field Engineering: Substation support, Site verification, Commissioning Safety Practices: PPE, Electrical safety, Energized equipment SKILLS SCADA EMS RTUs Telemetering Fiber Optics VHF Radio UHF Radio Microwave Radio MPLS Networking SONET TDM IP Networking VOIP Failure Analysis Substation Safety PROFESSIONAL AFFILIATIONS Institute of Electrical and Electronics Engineers, power and communications engineering participation. Arizona engineering community, continued involvement in utility systems and professional engineering development. LANGUAGES English (Native) Spanish (Proficient) ADDITIONAL INFORMATION Work Status : Authorized to work in United States. No sponsorship required. ADDITIONAL INFORMATION Work Status : Authorized to work in United States. No sponsorship required. REFERENCES AVAILABLE ON REQUEST
File
Styles Download Buy Log In
Bootstrap
> JP 1 1
PDF Footer and Margins Setup
The margins are applied to the document, and the footer shows up in the preview and the PDF

Footer Font Settings

Are you applying for a specific job
so we can tailor your resume to it?
Are you applying for a specific job
so we can tailor your cover letter to it?
Type your details as text to generate a personalized resume Type your details as text to generate a personalized cover letter
Website link found! Ready to create resume from:
Drag the into the box to verify you're human.
Drop here

My Resumes

Displaying {number_of_files} files (out of {total_of_all_files} total)
Name File Type Last Modified: Description:

Rename File

Filename already exists!

Delete Files

Warning: This action is irreversible. Once you click submit, the files will be permanently deleted.

Heading text
Upload From Computer Upload
Select From Existing
LinkedIn
Drag & Drop files anywhere in this tab, or

Uploaded Files

Delete Name Last Updated Use This File
Select this to use the file for generating your resume and cover letter. Only one source—uploaded file, selected file, or LinkedIn text—can be used.

My Files

Resumes or cover letters you create will appear here. No files available yet.
Delete Name Last Updated Use This File
Select this to use the file for generating your resume and cover letter. Only one source—uploaded file, selected file, or LinkedIn text—can be used.

Add LinkedIn Profile PDF

You can download your LinkedIn profile as a PDF by opening linkedin.com in a web browser, clicking your profile photo, selecting the “More” or “Resources” button, and choosing “Save to PDF.” You can then attach the PDF using the Upload From Computer tab.

Paste Your LinkedIn Profile Text

If you have copied the LinkedIn profile text, paste it below. See how to copy your profile from LinkedIn

Select this to use the LinkedIn profile text for generating your resume and cover letter. Only one source—uploaded file, selected file, or LinkedIn text—can be used.

Try these controls

<
>