Manufacturing Engineer Associate Resume Sergei Charles Manufacturing Engineer Associate (812) 555-6037 sergei.charles@example.com linkedin.com/example/sergeicharles Evansville, IN 47708 STRENGTHS Production Readiness Turned drawings, schematics, and parts data into practical build checkpoints. Faculty reviewers valued clear, usable documentation during capstone work. Product Verification Compared physical assemblies with released requirements and recorded discrepancies early. That habit kept review conversations focused and constructive. Obsolescence Review Studied an obsolete component through fit, interface, and function checks. A careful substitution record gave reviewers a sound starting point. Technical Documentation Used spreadsheets and documents for findings, logs, and engineering summaries. Clean records made follow up easier during supervised projects. Engineering Communication Presented verification evidence and production risks to review groups. Questions from peers helped sharpen recommendations and build confidence. SKILLS Manufacturing engineering Production engineering Engineering drawings Schematics Bills of Materials Parts Lists Product verification Obsolescence mitigation Production readiness Product life cycle Technical documentation PDM and PLM Process development Written communication Oral communication LANGUAGES English Native 40 Russian Intermediate 20 MY CAREER 11 Months Manufacturing Engineering Capstone Associate, Production Readiness at Capstone Project (4 Months) Product Verification Project Associate, Mechanical Subassembly at University Project (3 Months) Manufacturing Process Development Lab Associate, Mechanical Assemblies at Student Lab (4 Months) SUMMARY Early career manufacturing engineer with supervised academic experience supporting production readiness , product verification, technical documentation, and development to manufacturing transitions. Mechanical Engineering training includes reading engineering drawings and schematics, reviewing Bills of Materials and Parts Lists, evaluating prototype conformity, and recording manufacturing findings with Microsoft Office. Project work covered component obsolescence, controlled product data, design changes, production process development, and introductory PDM and PLM practices. Compared as built assemblies with released requirements, traced substitutions through structured records, and presented discrepancies to engineering reviewers. Clear written and oral communication supports practical coordination across manufacturing and engineering activities. U.S. citizen with a Bachelor of Science in Mechanical Engineering, prepared for full time, on site production engineering work. EDUCATION Bachelor's Degree in Mechanical Engineering University of Southern Indiana GPA: 0 2026 Evansville, Indiana Coursework: Manufacturing engineering, engineering drawings, product verification, materials planning TECHNICAL SKILLS Engineering Documentation: Engineering drawings, Schematics, Technical documentation Product Data: Bills of Materials, Parts Lists, Revision records Verification Methods: Product verification, Dimensional checks, Configuration checks Manufacturing Processes: Production readiness, Process planning, Assembly verification Life Cycle Management: Product life cycle, Development to manufacturing, Production transition PDM and PLM: PDM, PLM, Controlled product data Obsolescence Analysis: Component obsolescence, Part substitution, Interface review Microsoft Office: Excel, Word, PowerPoint Communication Tools: Technical reports, Engineering briefings, Review presentations Quality Records: Issue logs, Nonconformity records, Verification evidence SKILLS Manufacturing engineering Production engineering Engineering drawings Schematics Bills of Materials Parts Lists Product verification Obsolescence mitigation Production readiness Product life cycle Technical documentation PDM and PLM Process development Written communication Oral communication EXPERIENCE Manufacturing Engineering Capstone Associate, Production Readiness Capstone Project January 2026 - May 2026 Evansville, Indiana Supported a supervised production readiness effort for an electromechanical assembly. Converted technical requirements into build checkpoints, reviewed product data , assessed component obsolescence , and prepared engineering evidence for faculty review. Translated drawings, schematics, Bills of Materials , and Parts Lists into build checkpoints. Compared prototype assemblies with dimensional requirements and documented nonconformities for engineering review. Evaluated an obsolete component against interface, fit, and function requirements for substitution review. Mapped drawing release, material readiness, assembly verification, and configuration checks into one workflow. Organized revision controlled product records through university PDM and PLM lab practices. Presented manufacturing risks and verification results, then incorporated reviewer feedback into final documentation. Product Verification Project Associate, Mechanical Subassembly University Project September 2025 - December 2025 Evansville, Indiana Performed supervised verification work for a mechanical subassembly. Reconciled physical parts with drawings and product records, maintained technical findings, and communicated unresolved issues through instructor reviewed engineering summaries. Verified a mechanical subassembly against drawings and Parts Lists before supervised evaluation. Interpreted dimensions, tolerances, drawing notes, and schematics for a repeatable verification checklist. Reconciled Bills of Materials with physical parts and revision records, tracing substitutions. Maintained inspection results, issue logs, part comparisons, and engineering summaries in spreadsheets. Applied product life cycle concepts when distinguishing development revisions from final configurations. Delivered a technical briefing covering evidence, unresolved issues, and recommended corrections. Manufacturing Process Development Lab Associate, Mechanical Assemblies Student Lab January 2025 - May 2025 Evansville, Indiana Built supervised process plans for small mechanical assemblies. Connected design requirements with operation sequences, inspection points, material needs, controlled records, and practical production observations. Created process plans linking design requirements with operation sequence and inspection points. Read engineering drawings and schematics to determine component relationships during lab builds. Reviewed Bills of Materials and Parts Lists before builds, confirming identity and quantities. Tested process changes across repeated builds and recorded recurring production constraints. Maintained drawing revisions, process documents, and change records in a PDM and PLM environment. Prepared Microsoft Office reports summarizing process results, technical issues, and proposed improvements. PROJECTS Electromechanical Production Readiness Study 2026 Created a supervised readiness package for an electromechanical assembly. The study connected drawings, schematics, material status, verification evidence, configuration checks, and production transition decisions. Component Obsolescence Review 2026 Assessed an obsolete purchased component against interface, fit, and functional requirements. Prepared a controlled substitution recommendation supported by product records and engineering review notes. LEADERSHIP & AWARDS Engineering Senior Design Showcase Recognition, 2026 Dean's List, University of Southern Indiana, 2025 CERTIFICATIONS Microsoft Learn, Excel for Engineering Data Fundamentals 2026 University Continuing Education, Introduction to Product Lifecycle Management 2026 PROFESSIONAL AFFILIATIONS Mechanical Engineering Peer Study Group, Project Coordinator, 2025 to 2026 Senior Design Review Volunteer, 2026 LANGUAGES English (Native) Russian (Intermediate) ADDITIONAL INFORMATION Work Status : Authorized to work in United States. No sponsorship required. ADDITIONAL INFORMATION Work Status : Authorized to work in United States. No sponsorship required. REFERENCES AVAILABLE ON REQUEST
  • File
  • Preview
  • Show Styles
  • PDF Download
  • US English
File
Styles Download Buy Log In
Bootstrap
> JP 1 1
PDF Footer and Margins Setup
The margins are applied to the document, and the footer shows up in the preview and the PDF

Footer Font Settings

Are you applying for a specific job
so we can tailor your resume to it? Are you applying for a specific job
so we can tailor your cover letter to it?
Type your details as text to generate a personalized resume Type your details as text to generate a personalized cover letter
Website link found! Ready to create resume from:
Skip this Step
Drag the into the box to verify you're human.
Drop here

My Resumes

Displaying {number_of_files} files (out of {total_of_all_files} total)
Name File Type Last Modified: Description:

Rename File

Filename already exists!

Delete Files

Warning: This action is irreversible. Once you click submit, the files will be permanently deleted.

Heading text
Upload From Computer Upload
Select From Existing
LinkedIn
Drag & Drop files anywhere in this tab, or

Uploaded Files

Delete Name Last Updated Use This File
Select this to use the file for generating your resume and cover letter. Only one source—uploaded file, selected file, or LinkedIn text—can be used.

My Files

Resumes or cover letters you create will appear here. No files available yet.
Delete Name Last Updated Use This File
Select this to use the file for generating your resume and cover letter. Only one source—uploaded file, selected file, or LinkedIn text—can be used.

Add LinkedIn Profile PDF

You can download your LinkedIn profile as a PDF by opening linkedin.com in a web browser, clicking your profile photo, selecting the “More” or “Resources” button, and choosing “Save to PDF.” You can then attach the PDF using the Upload From Computer tab.

Paste Your LinkedIn Profile Text

If you have copied the LinkedIn profile text, paste it below. See how to copy your profile from LinkedIn

Select this to use the LinkedIn profile text for generating your resume and cover letter. Only one source—uploaded file, selected file, or LinkedIn text—can be used.

Try these controls

<
>