Utilities Electrical and Mechanical Specialist Trainee Resume Dawson Pena Utilities Electrical and Mechanical Specialist Trainee (863) 555-4172 dawson.pena@example.com linkedin.com/example/dawsonpena Lakeland, FL 33801 STRENGTHS Fault isolation During lab exercises, traced symptoms with meters and visual checks. Instructors valued clear findings and practical next steps. Preventive maintenance Routine lubrication and inspection work became a steady habit. Equipment reviews stayed orderly, useful, and easy to follow. Maintenance records CMMS practice turned scattered observations into usable work orders. Peers often checked entries when details needed clarification. Safe tool use Tool control mattered during every exercise. Careful setup, cleanup, and lifting supported smoother work without slowing the team. Team communication Troubleshooting presentations made technical findings easier to act on. Classmates frequently sought help with difficult symptoms. SKILLS Preventive Maintenance Pumps Valves Motors CMMS Work Orders Hand Tools Power Tools Meters Hydraulics Pneumatics Compressed Air Equipment Inspection Utility Maintenance Team Communication LANGUAGES English Native 40 Spanish Intermediate 20 MY CAREER 0 Months SUMMARY Early career utilities maintenance trainee with supervised preparation in water and wastewater equipment, pumps, valves, motors, mechanical systems, basic electrical troubleshooting, hydraulic systems, pneumatic systems, and compressed air. Practical lab work covered inspection, preventive maintenance , fault isolation, equipment handling, and safe use of hand, power, pneumatic, and test tools. Training included centrifugal and positive displacement pumps , motor driven equipment, valves, gear drives, instrumentation, and utility style maintenance records. Familiar with CMMS work orders, spreadsheet documentation, equipment condition reviews, and structured corrective action. Holds a valid Florida driver's license and OSHA 10 Hour General Industry training. Prepared for outdoor field assignments, physical work, changing locations, emergency response, and continued development toward independent utility maintenance. EDUCATION Industrial Maintenance Technology Certificate Polk State College GPA: 4.0 2026 Winter Haven, FL Coursework: Water and wastewater equipment, pumps and valves, electrical troubleshooting, hydraulic systems High School Diploma Lakeland Senior High School GPA: 4.0 2024 Lakeland, FL Coursework: Mathematics, science, technical education, workplace communication TECHNICAL SKILLS Pumps: Centrifugal pumps, Positive displacement pumps, Submersible pumps Valves: Check valves, Control valves, Plug valves Motors: Fractional horsepower motors, Motor driven equipment, Motor inspection Tools: Hand tools, Power tools, Pneumatic tools Testing Equipment: Multimeters, Electrical meters, Inspection checklists Hydraulic Systems: Hydraulic circuits, Flow checks, Pressure checks Pneumatic Systems: Pneumatic components, Air release systems, Actuator checks Compressed Air: Compressed air systems, Air pressure checks, Pneumatic maintenance Maintenance Records: CMMS, Work orders, Spreadsheet records Utility Equipment: Gear drives, Aeration blowers, Mechanical bar screens Maintenance Methods: Preventive maintenance, Corrective maintenance, Emergency repair Water Systems: Potable water, Wastewater collection, Reclaimed water Safety Practices: OSHA 10 Hour General Industry, Safe lifting, Ladder safety SKILLS Preventive Maintenance Pumps Valves Motors CMMS Work Orders Hand Tools Power Tools Meters Hydraulics Pneumatics Compressed Air Equipment Inspection Utility Maintenance Team Communication EXPERIENCE Utilities Mechanical Maintenance Trainee Student Lab January 2026 to September 2026 Lakeland, FL Completed supervised utility maintenance training across pumps, motors, valves, gear drives, compressed air components, tools, meters, CMMS records, and safe equipment handling. Presented findings to instructors and peers while building practical judgment for inspection, preventive maintenance, troubleshooting, and corrective work . Inspected centrifugal pumps , small motors, valves, and gear drives using checklists and equipment manuals. Isolated simulated mechanical and electrical faults with multimeters, pneumatic tools , and basic test equipment . Completed lubrication, alignment checks, fastener inspections, cleaning, and condition reviews during scheduled maintenance. Recorded work order status, equipment observations, corrective actions, and parts information in CMMS training logs. Practiced safe lifting, ladder use, equipment handling, and shop housekeeping during utility maintenance assignments. Presented diagnostic findings and follow up checks clearly during instructor and peer reviews. Water and Wastewater Equipment Reliability Trainee Capstone Project August 2025 to December 2025 Lakeland, FL Built a supervised reliability plan for a training scale water system with pumps , valves, piping, a motor, and instrumentation. Connected inspection routines, fault diagnosis, spreadsheet records, and safe operating practices with dependable utility equipment performance. Built a maintenance plan for pumps, valves, piping, motors , and instrumentation in a training water system. Compared centrifugal and positive displacement pump behavior under changing flow conditions for a maintenance report. Created inspection checklists for valves , motor driven equipment, pneumatic components, and piping connections. Diagnosed seeded faults through visual inspection, meter readings, mechanical checks, and cause elimination. Created spreadsheet records covering assets, maintenance intervals, observed conditions, corrective actions, and completion dates. Presented reliability findings to faculty reviewers, connecting preventive maintenance with safe utility operation. PROJECTS Industrial Mechanical and Electrical Systems Project 2025 Assembled training circuits and mechanical drive components under supervision. Used diagrams, drills, grinders, torque tools, pneumatic tools, and electrical meters while evaluating hydraulic and pneumatic conditions. Documented test results, corrective steps, and restoration activities during team maintenance simulations. LEADERSHIP & AWARDS Technical Education Achievement Award, 2026, recognized practical performance in industrial maintenance training. Dean's List, 2025, recognized consistent academic performance at Polk State College. CERTIFICATIONS Valid Florida Driver's License 2026 OSHA 10 Hour General Industry 2025 PROFESSIONAL AFFILIATIONS Peer Lab Safety Volunteer, Industrial Maintenance Program, supported safe tool control and orderly training spaces. Campus Service Day Volunteer, contributed dependable hands on support during community service activities. LANGUAGES English (Native) Spanish (Intermediate) ADDITIONAL INFORMATION Work Status : Authorized to work in United States. No sponsorship required. ADDITIONAL INFORMATION Work Status : Authorized to work in United States. No sponsorship required. REFERENCES AVAILABLE ON REQUEST
File
Styles Download Buy Log In
Bootstrap
> JP 1 1
PDF Footer and Margins Setup
The margins are applied to the document, and the footer shows up in the preview and the PDF

Footer Font Settings

Are you applying for a specific job
so we can tailor your resume to it?
Are you applying for a specific job
so we can tailor your cover letter to it?
Type your details as text to generate a personalized resume Type your details as text to generate a personalized cover letter
Website link found! Ready to create resume from:
Drag the into the box to verify you're human.
Drop here

My Resumes

Displaying {number_of_files} files (out of {total_of_all_files} total)
Name File Type Last Modified: Description:

Rename File

Filename already exists!

Delete Files

Warning: This action is irreversible. Once you click submit, the files will be permanently deleted.

Heading text
Upload From Computer Upload
Select From Existing
LinkedIn
Drag & Drop files anywhere in this tab, or

Uploaded Files

Delete Name Last Updated Use This File
Select this to use the file for generating your resume and cover letter. Only one source—uploaded file, selected file, or LinkedIn text—can be used.

My Files

Resumes or cover letters you create will appear here. No files available yet.
Delete Name Last Updated Use This File
Select this to use the file for generating your resume and cover letter. Only one source—uploaded file, selected file, or LinkedIn text—can be used.

Add LinkedIn Profile PDF

You can download your LinkedIn profile as a PDF by opening linkedin.com in a web browser, clicking your profile photo, selecting the “More” or “Resources” button, and choosing “Save to PDF.” You can then attach the PDF using the Upload From Computer tab.

Paste Your LinkedIn Profile Text

If you have copied the LinkedIn profile text, paste it below. See how to copy your profile from LinkedIn

Select this to use the LinkedIn profile text for generating your resume and cover letter. Only one source—uploaded file, selected file, or LinkedIn text—can be used.

Try these controls

<
>